Spinner graphics to show loading progress.
Title Unavailable

Title Unavailable

ADD TO CART
NOTIFY ME WHEN AVAILABLE
Related Products:
Product Summary

ArmaLite, Inc. is pleased to announce the AR-10A. This new option of the famous AR-10 will accept traditional ArmaLite “waffle” magazines and some 3rd party magazines.

The AR-10A family of ArmaLite® firearms is functionally identical to our AR-10B family. Operation, controls, and maintenance are the same. However, the AR-10A family is designed to accept early ArmaLite AR-10 “Waffle” magazines and good quality magazines copied from them, instead of ArmaLite’s proprietary steel magazines that are used in our AR-10B family. Neither family of firearms will function correctly with the other family’s magazines.

ArmaLite has tested, we recommend, and we ship polymer Magpul PMAG® 20LR magazines with ArmaLite AR-10As.

The ArmaLite AR10A SuperSASS™ rifle looks sharp. It’s an eye-catcher. But it’s what’s INSIDE the SuperSASS that counts. Its aircraft-grade forgings have NO die-cast or extruded parts in the receivers. The interior surfaces of the upper receivers are hard coat anodized per military spec. In fact, ALL aluminum parts are hard coat anodized per military spec. SuperSASS barrels are ceramic coated stainless steel match. The patented bolt assembly is stronger than those found in similar firearms. The trigger is a finely tuned ArmaLite National Match. With all this “inside information,” there’s no doubting “The ArmaLite Standard of Excellence.”

The SuperSASS TM is configured as follows:

- Adjustable Gas System to Optimize Rifle Function with Suppressor
- Armalite Floating Rail System with Rail Covers
- Magpul Adjustable Buttstock
- .875 at the Journal (Under the gas block)
- Length of Pull: 14 1/2"
- Semi-Auto

Specifications:

- Caliber: .308/7.62 X 51mm NATO
- Barrel: 20" Triple lapped, Ceramic Coated AISI 416R Stainless Steel Match, Threaded 5/8x24
- Rifling Twist: RH 1:10" 150-175 Grain, Recommended 168
- Muzzle Device: Flash Suppressor
- Front Sight Base: Quad Picatinny Rail Handguard
- Upper Receiver: Forged Flattop with Picatinny Rail & Laser Engraved Rail Numbering 7175-T74 Aluminum
- Lower Receiver: 7175-t73 Aluminum (forged)
- Trigger: National Match two stage - 1st stage 2.5 lbs - 2nd stage 4.5-5 lbs
- Overall Length: 41 - 42"
- Weight: 11.84 lbs
- Accuracy: 1 MOA

Caliber Dictionary

The Below Information Has Been Provided From Our Gun Caliber Dictionary And Is Meant For Informational Purposes Only. It Is Not Intended to Describe The Unique Specifications For This Ammunition.
The 308 Winchester (7.62x51 NATO) was introduced by in 1952. Based on the T65 experimental military cartridge, Winchester essentially jumped the gun with the civilian introduction; the 7.62x51 wasn't officially adopted (or named) until 1954. The military's intent was to create a shorter cartridge that would fit into a lighter version of the M1 Garand. This was successful beyond their wildest dreams: The 308 Winchester is essentially a 30-06 case greatly shortened to 2.015-inch, but it lags only about 100 feet per second behind the 30-06 in velocity, and with it shorter, more efficient case it tends to be more accurate. The 308 is suitable for any hunting for which the 30-06 is suitable--which means almost anything in the world short of large, dangerous game. The 308 is a standard chambering among most manufacturers and is found in all action types. Factory loads are legion, including a wide selection of very accurate match loads. — Craig Boddington

Specifications
Specification   Value
Quantity   1
     
MFG NO    A10SBF
SKU    1033658
UPC    000000001257
Manufacturer
ArmaLite, Inc
Phone:   309-944-6939
Email:   info@armalite.com
Website:   http://www.armalite.com
Address:   745 S. Handford
PO Box 299
Geneseo, IL 61254
Quantity Pricing
Quantity Available Price
Reviews
  There are no reviews yet for this item.
Suggested Products:
 
 


OK
© 1998 - 2024 Wholesale Hunter.
Your guns, ammo, hunting & more store.