Key Features : Receiver machined from solid-steel bar stock resulting in uniformity and strength
Cylindrical receiver design provides a solid bedding area in the stock for consistent shot placement
Recessed bolt face locks up inside the counter-bored breech of the barrel which is surrounded by the receiver, forming “three-rings-of-steel” enclosing the cartridge case head for unparalleled strength
Integral extractor is set in a groove inside the rim of the bolt face, uniformly supporting the cartridge head
X-Mark Pro™ Trigger – featuring super-tight tolerances and mirror-like surface finishes, it breaks like glass and is adjustable for trigger pull weight
Caliber: 270 Winchester
Weight: 7.5lbs.
Barrel Length: 24"
Oal: 45 1/2
Twist: 1:10"
Caliber Dictionary
The Below Information Has Been Provided From Our Gun Caliber Dictionary And Is Meant For Informational Purposes Only. It Is Not Intended to Describe The Unique Specifications For This Ammunition.
The 270 Winchester was introduced in 1925 in the Winchester Model 54 bolt-action, forerunner to the Model 70. Based on the 30-06 case necked down, it was the first production cartridge to use a .277-inch bullet. Why this bullet diameter was chosen is not clear. The intent, however, was to create a cartridge that shot flatter than the 30-06 and produced less recoil. This effort was so successful that the 270 Winchester remains the world's most popular 270 cartridge...and since 1925 only three other commercial cartridges have used this bullet diameter. With a 130-grain bullet at 3060 feet per second and a 150-grain bullet at 2950 the 270 is powerful and flat shooting. It is adequate for game up to elk, ideal for virtually all American deer hunting, and, as it's long-time champion, gunwriter Jack O'Connor, so often wrote, it is a marvelous choice for mountain hunting. It is a standard chambering for almost all rifle makers, and choices in factory loads run into the many dozens. — Craig Boddington
