Battle Arms Development, Inc. AR-15 VERT Stock System

Battle Arms Development Inc. VERT Stock System (BADCSS)

The BAD-CSS(tm) and Ultra Compact Pistol SABERTUBE using the patented VERT buffer system have been tested on industry standard, factory Colt 6920 (direct impingement) to be a drop-in stock system using factory 5.56/.223 ammunition. However, due to the limitless possible configurations of the AR-15 rifle system from aftermarket components and the variety of ammunition used, the rifle may be under gassed for the VERT buffer system. Some adjustments or modification may be required. The most common adjustment if the bolt fails to lock back on the last round is to open the barrel gas port diameter to increase the gas into the system to fully cycle and compress the inner buffer spring for reliable operation. An adjustable gas block, adjustable gas key or adjustable bolt carrier is recommended for tuning the gas system.

The VERT buffer system have been tested successfully with 300BLK direct impingement AR platforms in semi-auto and full-auto fire. However, the rifle system must be configured properly. 300BLK supersonic and 300BLK subsonic ammunition have drastically different characteristics. They will also perform differently suppressed and unsuppressed. The rifle may be tuned to function on one end of the spectrum or the other. Please do not expect the stock to run on the same rifle configuration between shooting suppressed vs. unsuppressed and supersonic vs. subsonic.

The system should be configured, installed and function checked by a qualified gunsmith for reliable and safe operation.

Features:
- Will not work with solid filled 9mm bolt carrier
- VERT TM buffer system is designed for 5.56/.223 direct gas impingement system. Will also work on 300BLK DI system as well but must have appropriate gas port size.
- Use of NICKLE BORON Coated Bolt Carrier may cause damage to the buffer system due to the I.D. (Inside Diameter) of the BCG being undersized
- Inside, rear cavity of the bolt carrier must be .625" diameter x .625" deep minimum to clear the buffer. Damage may occur if proper clearance isn't met

Specifications:
- Continuous Cheek Rest
- Interchangeable Cheek Rest (different colors/patterns, coming soon)
- Ultra Compact Buffer & Buffer Spring
- Fully Collapsed Length = 4.75"
- Fully Extended Length = 8 3/4"
- (4) Locking Stock Positions
- Stock Locks Both Directions
- Precision CNC from Aircraft Grade Aluminum & S7 Tool Steel
- MilSpec Type III Class 2 Hard Anodized Black
- (2) Built-In Non-Rotating QD Points
- Lightweight 19.5 Ounces (Complete Stock System with Buffer & Springs)
- Made in the USA
- Patents Pending

Manufacturer: Battle Arms Development Inc.
MFG Number: BADCSS
UPC: 100018167