Daniel Defense DD5V4 Semi-Auto Rifle 308Win 18" Barrel (1)-30Rd Mag Brown Polymer Finish
The DD5 V4, chambered in either 6.5 Creedmoor or 7.62x51mm NATO, provides users of the Daniel Defense semi-automatic platform even greater long-range precision shooting capability. The highly popular 6.5 Creedmoor takes advantage of superior ballistic coefficients to offer both flatter trajectories and reduced wind drift at levels normally reserved for much heavier recoiling long action calibers. These gains in ballistic efficiency help the modern shooter stretch the effective range out to 1,000 meters or more. This highly accurate and durable rifle includes an adjustable gas block that allows for a consistent feel whether shooting suppressed or unsuppressed. The perfected bolt carrier group reduces overall recoil impulse and is easy to maintain and operate in all conditions.
• User-adjustable gas block for reliable suppressed shooting
• Superfinished and DLC-coated bolt carrier group makes it easy to clean and operate in all conditions
• Bolt carrier is equipped with a buffer for optimized cycling and improved recoil impulse
• Bolt is designed with enhanced extractor geometry and dual ejectors for reliable cycling
• 18" Cold Hammer Forged proprietary steel chrome-lined barrel for a lifetime of accuracy and durability
• Innovative 4-Bolt Connection System to ensure greater accuracy
• GRIP-N-RIP independently ambi charging handle with anti-gas features for a better shooting experience
Materials & Construction
• LOWER RECEIVER: Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
• UPPER RECEIVER: CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
• BARREL: DD Proprietary Steel, Cold Hammer Forged, 1:8" (6.5 Creedmoor), 1:11" (7.62), 18" S2W Profile, Rifle Length, Chrome Lined, Mil-Spec Heavy Phosphate Coated
• GAS SYSTEM: User-Adjustable Gas Block CNC Machined of 4140 Hardened Steel and Mil-Spec Heavy Phosphate Coating, Rifle Length, Direct Impingement
• MUZZLE DEVICE: Daniel Defense Superior Suppression Device, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
• TRIGGER: Daniel Defense Mil-Spec
• HANDGUARD: Daniel Defense DD5 Rail 15.0, CNC Machined of 6061-T6 Aluminum, M-LOK Attachment, Type III Hard Coat Anodized
• RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
• BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
• PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
• MAGAZINES: Accepts All SR-25 Magazines
• Made in the USA!
Mounting System: M-LOK
Caliber: 7.62 x 51mm / .308 Winchester
Muzzle Thread: 5/8×24 TPI (Threads Per Inch)
Gas System: Rifle
Barrel Length: 18"
Barrel Profile: S2W® [Strength-to-Weight]
Product Weight: 8.6 LBS
Length: 35 3/8" - 39"
Magazine: Magpul PMAG 20-Round
Case: Daniel Defense Full-Latch Impact Plastic Case
The information below comes from our Gun Caliber Dictionary and is for
general reference only. It does not describe the specifications of this
particular item.
The 308 Winchester (7.62x51 NATO) was introduced by in 1952. Based on the T65 experimental military cartridge, Winchester essentially jumped the gun with the civilian introduction; the 7.62x51 wasn't officially adopted (or named) until 1954. The military's intent was to create a shorter cartridge that would fit into a lighter version of the M1 Garand. This was successful beyond their wildest dreams: The 308 Winchester is essentially a 30-06 case greatly shortened to 2.015-inch, but it lags only about 100 feet per second behind the 30-06 in velocity, and with it shorter, more efficient case it tends to be more accurate. The 308 is suitable for any hunting for which the 30-06 is suitable--which means almost anything in the world short of large, dangerous game. The 308 is a standard chambering among most manufacturers and is found in all action types. Factory loads are legion, including a wide selection of very accurate match loads.
—
Craig Boddington
