PMC Bronze 40 S&W 180 Grain Full Metal Jacket Ammo 50 Round Box

PMC's Bronze Handgun Ammo is manufactured with the same quality and dependability built into the Starfire ammunition. All PMC cartridges must pass through the rigorous inspection of the electronic powder check station. If the propellant in any cartridge varies by as little as two-tenths of one grain, the system stops, and that cartridge is discarded.

Brand PMC

Category Centerfire Handgun Rounds

Caliber 40 S&W

Model Bronze

Bullet Weight 180 gr

Rounds Per Box 50

Casing Material Brass

Application Plinking

Boxes Per Case 20

Bullet Type Full Metal Jacket Flat Point (FMJFP)

Muzzle Energy 388 ft lbs

Muzzle Velocity 985 fps

Caliber Dictionary

The Below Information Has Been Provided From Our Gun Caliber Dictionary And Is Meant For Informational Purposes Only. It Is Not Intended to Describe The Unique Specifications For This Ammunition.

Designed by Winchester and introduced by Winchester and Smith & Wesson in 1990, the 40 S&W was designed as a "compromise" semiautomatic pistol cartridge that would offer more performance than the 9mm Luger (9x19)…but would produce less recoil and allow higher magazine capacity than the 45 ACP. Few compromises in the firearms world have ever worked as well. From a manufacturing standpoint many pistols designed for the 9mm could be re-engineered to handle the larger cartridge; in a short time it has become a standard issue in the law enforcement community. Using a .400-inch bullet of from 135 to 180 grains from a .850-inch cae, the .40 S&W produces up to 1205 fps, and although recoil is greater than the 9mm, it is easier to shoot than the 45 ACP, and its greater velocity and smaller bullet diameter aid penetration. — Craig Boddington

Specifications