Daniel Defense M4 Carbine V11 Pro 5.56mm NATO, 18-Inch Barrel, 1/2x28 TPI, 32-Round Magazine Capacity, Tungsten Grey Md: 0215106042047
The DDM4V11 Pro, finished in our Daniel Defense Tornado Cerakote, was designed for competitors looking for the platform to dominate podiums in today’s popular multi-gun matches. Built around our newest 18” Strength to Weight, Cold Hammer Forged barrel, this platform delivers the speed, controllability, and precision required to engage the course designer’s most difficult stages. The V11 Pro carries the new SLiM Rail 15.0 which offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel Defense. An uninterrupted picatinny rail on top and KeyMod attachment at 3, 6, and 9 o’clock, ensures plenty of real estate for optics and accessories and allows for maximum sight radius for accurate shooting with rail mounted iron sights.
The long, 15” rail gives operators the option to have the support hand extended out closer to the muzzle allowing them to drive the gun more precisely and prevents over travel when transitioning between multiple targets. Competitors will also appreciate the larger latch provided by a Vltor Gunfighter Mod 4 Charging Handle for easier manipulation under magnified optics. A newly designed Muzzle Climb Mitigator redirects propellant gasses through calibrated ports, countering both recoil and muzzle climb. A Geissele Automatics Super Dynamic 3 Gun Trigger delivers rapid hits on target with its light, short pull and quick reset. Combined with the softened recoil impulse of a rifle length gas system, equals shorter split times, more precise follow-up shots, and reduced fatigue.
Materials & Construction:
- LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum
- UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum
- TRIGGER: Geissele Automatics Super Dynamic 3 Gun Trigger
- BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 18? S2W Profile, and Salt Bath Nitride Finished
- GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Rifle Length, Direct Impingement
- MUZZLE DEVICE: Daniel Defense Muzzle Climb Mitigator, Gen II, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
- BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
- PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
- FINISH: Daniel Defense Tornado Cerakote
- Made in the USA!
Specifications:
Caliber: 5.56mm NATO
Muzzle Thread: 1/2×28 TPI (Threads Per Inch)
Gas System: Rifle
Barrel Length: No
Profile: No
Product Weight: 7.53 lb
Length: 34 ¾” – 37 7/8”
Magazine: DD Magazine(32 rounds)
Case: Daniel Defense Full-Latch Impact Plastic Case
Caliber Dictionary
The Below Information Has Been Provided From Our Gun Caliber Dictionary And Is Meant For Informational Purposes Only. It Is Not Intended to Describe The Unique Specifications For This Ammunition.
The 5.56X45mm NATO cartridge was designed by James Sullivan, a member of Eugene Stoner's engineering team that developed both the M16 rifle and its original cartridge. The 5.56X45mm NATO was adopted by the U.S. military in 1964 and by NATO in 1980. With bullet diameter of .224-inch, the original M193 military cartridge used a 55-grain bullet at 3250 fps; the current M855A1 cartridge, developed by FN, uses a 62.5-grain bullet at 3020 fps, offering greater range and better penetration. The civilian version of the 5.56X45mm is 223 Remington; the cartridges are dimensionally identical but military chamber dimensions and specifications for military brass are different. It is considered safe to use 223 Remington ammo in a 5.56X45MM NATO chamber, but not a good idea to use 5.56X45mm ammo in a rifle specifically chambered for the 223 Remington. Although the stopping power of .22-caliber bullets remains controversial the 5.56X45mm has served well in now multiple generations of M16 rifles. — Craig Boddington
