The Stag Arms Stag 10S (.308) M-LOK was specifically designed for those moments where you need that extra power in close quarters, now with a light-weight ergonomic 13.5" Stag Handguard. The Stag .308 line features a Stag slant cut design and includes uniquely designed parts for the lower to guarantee the best fit between the upper and lower. The remainder of the rifle utilizes the DPMS .308 platform for parts compatibility.
The Stag 10S features a .308 chamber 16" 1/10 barrel, VG6 Gamma Compensator, 13.5" Stag M-LOK Handguard and a QPQ Nitride BCG.
Every complete rifle from Stag Arms comes with a Transferable Lifetime Warranty, an Infinite Shot Barrel Guarantee, a magazine and a rifle case.
Specifications:
Weight: 8.2 pounds
Length: 35.25" collapsed, 38.50" extended
Action: Semi-Auto Direct Impingement
Caliber: .308 Winchester | 7.62x51
Twist Rate: 1/10 button rifled
Muzzle Device: VG6 Gamma 762
Barrel: 16", 4150 steel, chrome lined
Handguard: 13.5" Stag M-LOK Handguard
Receiver Material: Forged 7075 T6 aluminum with type 3 hard coat anodizing. Upper features a .210 Tang Height (DPMS High Profile)
Bolt Carrier: .308 Nitride QPQ BCG
Hammer/Trigger pin size: Mil-spec small pin .154"
Pivot/Takedown Pin Size: .2770"
Buttstock: Magpul ACS Stock
Gas System: Low Profile Gas Block with Mid-Length Gas Tube
Buffer: Standard .308 Carbine Buffer and .308 Action Spring
Trigger: Mil-spec single stage trigger with a non-adjustable 5-8 lb trigger pull
Grip: Hogue Grip
Magazine: 10rd PMAG
Safety Selector: Right Hand
Caliber Dictionary
The Below Information Has Been Provided From Our Gun Caliber Dictionary And Is Meant For Informational Purposes Only. It Is Not Intended to Describe The Unique Specifications For This Ammunition.
The 308 Winchester (7.62x51 NATO) was introduced by in 1952. Based on the T65 experimental military cartridge, Winchester essentially jumped the gun with the civilian introduction; the 7.62x51 wasn't officially adopted (or named) until 1954. The military's intent was to create a shorter cartridge that would fit into a lighter version of the M1 Garand. This was successful beyond their wildest dreams: The 308 Winchester is essentially a 30-06 case greatly shortened to 2.015-inch, but it lags only about 100 feet per second behind the 30-06 in velocity, and with it shorter, more efficient case it tends to be more accurate. The 308 is suitable for any hunting for which the 30-06 is suitable--which means almost anything in the world short of large, dangerous game. The 308 is a standard chambering among most manufacturers and is found in all action types. Factory loads are legion, including a wide selection of very accurate match loads. — Craig Boddington
