Turkey guns and loads have come a long way.
By
Craig Boddington
I often claim that I’m the world’s worst turkey hunter. Possibly not true, but when I tell you what I did last week, you’ll believe me. I was trying to get a Rio Grande gobbler on my kids’ place in Texas. Running out of time, I took a final cruise down the power line road, stopped foe one more call. Good grief, a gobbler cut loose. Not far away. Grabbed the shotgun, pumped the action, ducked into the woods.
I found a perfect tree to sit against, got the gun across my knees, went to work on the slate. Double gobble, closer. Couple minutes later I saw the red head. Then another. Two nice gobblers, coming straight in. Both were good birds. When they were about 30 yards away I held the bead low on the neck of the larger tom…and heard the loudest CLICK ever. Plenty loud for the turkeys, too. They were gone. My fault or the gun? I know I pumped the action, but the bolt didn’t pick up a shell. And so ended my 2024 Texas turkey hunt.
The shell that I didn’t fire was a Hornady 12-gauge three-inch, nickel-plated No. 5 shot. Those were good shells, shot several gobblers with them. Still have a few, so I may shoot another turkey before they’re gone. Provided I can remember to load my darned gun. I was sad when Hornady got out of the turkey load business. I asked why and was surprised at the answer: “Turkey loads are getting ever more specialized.”
Man, are they. Not being a truly avid (or expert) turkey hunter, I missed much of this. Those Hornady turkey loads were good shells, though not much different from good shells I’ve used most of my life: Heavy payload of high-quality nickel-plated lead shot. Today, there are at least a dozen types of shot on the market. I don’t claim to have experience with all. I’ve shot couple of turkeys with bismuth shot, pretty good stuff. One, years ago, with steel shot duck loads. It worked, but I don’t recommend that. HD and Hevi Shot, both tungsten alloys, are excellent.
I was introduced to HD on a writer’s hunt in Mississippi several years ago, with experimental HD shells from Kent. Incredibly impressive on the pattern board, used them for a couple of gobblers, equally impressive. HD and Hevi Shot are excellent, and the shells are reasonably affordable. However, they aren’t TSS. Tungsten Super Shot (TSS) is easily the deadliest shot to date. Just two years ago my Georgia friend and Eastern gobbler mentor Zack Aultman introduced me to TSS.
As a metal, tungsten is denser than lead. Water has density of 1 g/cc (gram to cubic centimeter). The old standby lead is 11.3 g/cc, while tungsten is a whopping 18.1 g/cc. Tungsten is both heavier and harder than lead. In effect, you can drop down three or four shot sizes, still get more penetration per pellet, and a lot more pellets in your pattern. Because it’s harder and heavier, patterns hold together better. With lead, I’ve always been a No. 5 shot guy on turkeys, although I’ve often used No. 6. Often, I hedge my bet with No. 4 as the second shell in the magazine or in the second barrel. Smaller shot for head shots, larger shot for backup body shots if needed.
With TSS, you can drop down to 8s or 9s, no real need for larger shot for backup. It’s that effective. You can also back off a gauge or two. Less recoil in a lighter gun. With TSS, serious hunters are confidently taking turkeys with .410s. Me, I’m neither that serious, nor that confident. For years, believing bigger was surely better, I used a 10 gauge. More of a fashion statement than a necessity. I went to a 12-gauge long ago, and today I’m perfectly happy with a 20-gauge…with good shells and a tight choke.
Last year and this, I took Eastern gobblers at Zack’s place, using Apex shells, loaded in Mississippi. Last year I used a Mossberg 12 gauge with two ounces of No. 8 TSS. One shot at the pattern board to verify. No turkey was going to walk through that pattern. The gobbler I shot was farther than I like, past 40 yards. Didn’t matter.
This year, a week before my comeuppance in Texas, Zack loaned me a 20-gauge Benelli, this time with 1 5/8 ounces of Apex 8 ½ TSS. Again, one shell to verify the pattern. With young Ben Pickren on the call—13 years old and so good I stayed quiet—we had a nice tom come to about 25 yards. Straight down without a wiggle.
That’s good, but this struck me more: I held low on the neck and was concerned the pattern might have messed up the breast. Not a single pellet the breast meat, only couple pellets in the head. The pattern centered exactly where I was aiming, low on the neck. That’s tight.
With the turkey business done, we had some time to play. Zack dug around camp, found odds and ends of five different flavors of 20-gauge TSS shells. A Federal Premium load was the only one from a major manufacturer. He also found a hatful of 20-gauge turkey chokes.
Bigger isn’t necessarily better. As I wrote in this column a year ago, I lost a turkey pasted center-chest with a 10-gauge. That was poor shot placement: the head was tucked in, bad decision. In truth, my plain-Jane 10 gauge double that I loved threw terrible patterns. Not much development in 10-gauge chokes (or shells) because it’s uncommon and not essential.
Although the science is hardly new, chokes have developed along with shot and shells. Unfortunately, at the cost of TSS shells, nobody spends a lot of time on the pattern board. Too bad because there is much to learn.
No way I was going to run through six chokes, and we didn’t have enough shells anyway. I shot my turkey with a Rob Roberts choke, so we patterned it at 25 yards with four loads. No turkey could walk through any of those patterns, but a Boss Tom No. 9 TSS load clearly patterned better than the rest, including the Apex Ninja No. 8 ½ load I’d taken my turkey with.
Sort of randomly, next we tried Primos’ Jellyhead choke tube. Again, in this choke, in this gun, on this day, the Boss Tom load won. Big time. I’m not sure I’ve ever seen a pattern like that before. About 70/30 above/below point of aim, density scary just above point of aim. I prefer high-shooting shotguns and always aim below point of impact. It is said that 60/40 (60 percent above aim, 40 percent below) is ideal, but I’m okay with 70/30. As an old trapshooter, I don’t want a flat-shooting shotgun where I must cover the head. My preferred hold is low neck, so I want a high-shooting shotgun.
Dad and I hunted turkeys in Missouri in the mid-Sixties, when the Ozarks first opened. I maintain my position that I’m not a serious turkey hunter. However, with nearly 60 years of experience, my long-set habits and opinions don’t change easily. Obviously, with better, deeper-penetrating shot and denser patterns, sensible ranges are increased. I know how far some folks are shooting turkeys, but I’m not going there. At 71, it’s like open sights on a rifle. My window has shrunk. I’m a 40-yard guy, do-able with older shells as well as new. Closer is better, but not too close. I’d rather have a pattern to play with, rather than a tight ball of shot.
The most important thing: Essential to pattern your shotgun. We can still kill turkeys with old-fashioned shells. We must be able to because, awesome as it is, TSS has drawbacks. Since it’s harder than lead, it cannot be used in many older shotguns. If okay with steel, it’s probably okay with TSS. I have guns than can’t use either.
Then, there’s cost. Frightful. Tungsten is a scarce metal, few mines in the world. Some of the shells we were gleefully flinging at paper targets were ten-dollar shells. Ouch. Although tungsten based, HD and Hevi Shot are alloys that use less tungsten, less expensive. Not as good as TSS, but better than good old lead shot…which is not damning with faint praise. Despite efficacy, I wouldn’t hunt waterfowl with TSS. A turkey, well, kind of a big-game bird. Tasty, but more a trophy hunt than a meat hunt. I baulk hard at a $10 shotgun shell. Much the same cost as .470 Nitro Express. But we only need a few: One to verify pattern and point of aim. One to kill the bird, maybe a spare just in case. With the results I’m seeing, pricey but acceptable.
